On a Roll: Best Practices for How to Roll a Joint
Before, there was one way to enjoy cannabis—to smoke it. You could put it in a pipe, stuff your bong, or roll a joint. Now it feels like there are countless ways you can access the benefits of the cannabis plant. At the same time, sometimes the simple joy of rolling a joint is the most desirable solution for dosing. Here’s what you should keep in mind to master the age-old art of how to roll a joint.
What to Know Before Rolling a Joint
While rolling joints is considered an honored pastime within the community of cannabis consumers at large, there are many recent innovations that have transformed the practice. The most notable of these innovations is the widespread popularity of flavored rolling papers which allow you to better customize the taste of your joint. Banana kush bud with strawberry rolling papers? Sounds like a win to us.
In addition to a massive selection of flavors now available, rolling papers can also come in various sizes. Large rolling papers are ideal for robust blunts that are intended to be passed around with friends or other groups of cannabis enthusiasts, whereas smaller rolling papers may be suited for individual joints that can compliment a night by yourself.
Finally, some rolling paper brands are known to be of higher quality than others. Test out a few so you can find the ideal ones for your needs.
The Proper Method for How to Roll a Joint
Joint rolling requires practice before mastering, but it can become an exceedingly satisfying endeavor. The first step in any joint-rolling session is to grind your flower into a fine form. You don’t need to grind the cannabis into a powder, but it should be fine enough to smoothly fill out your joint.
Once you have your cannabis, carefully set a filter at one end of the joint. This filter will end up forming the base of your joint. Next, distribute your cannabis throughout the rolling paper, taking care that you pack the joint evenly. Uneven joints can result in poor airflow and pockets that can create a messy, lopsided burn.
Finally, hold each end of your joint with the tips of your fingers and begin to roll it, folding one end of the paper into the other. When your joint has been cinched up properly, simply seal it with one lick across the top. Leaving some breathing room at the end of your joint is recommended to produce the smoothest possible smoking experience.
Tips and Tricks for How to Roll a Joint
When rolling joints, it’s important to keep in mind that there are many time-honored methods that may work for different individuals. Experimenting with the exact style that works for you can be a lucrative experience, as the best joint rollers are able to work in their own unique rhythm.
Likewise, joint rolling has a long history as a virtual art form within the world of cannabis. There are numerous creative style of rolling a joint that have been described in detail on the Internet and other sources of marijuana knowledge, providing ample opportunities for impressing attendees at your next cannabis get-together.
Don’t want to roll your own? We carry pre-rolls to make life easier. Check out our online menu to see what’s available or stop by our Columbia dispensary to learn more.The modern cannabis market is full of new and innovative products. However, learning how to roll a joint is an age-old skill that will never lose its value.
How to roll a joint
Copy article link to clipboard.
Link copied to clipboard.
- What is a joint?
- What you need to roll a joint
- How to roll a joint
- Why do people like joints?
- Why do people hate joints?
Joints are one of the most popular ways to consume cannabis. There are several different types of joints in the world of weed, and a variety of methods to make them. Rolling a joint can be a highly personal, intricate craft, but with a few simple steps, any new toker can roll their very own. Read on to learn about the art of rolling a joint.
What is a joint?
A joint is a cannabis cigarette often hand-rolled by an individual. Some dispensaries offer prerolls, or joints rolled in-shop, for consumers to purchase, saving a few steps. A cannabis joint that includes both cannabis and tobacco is called a spliff, while a blunt is a joint rolled with heavy, dark, tobacco papers.
A joint is a cannabis cigarette often hand-rolled by an individual. Photo by: Gina Coleman/Weedmaps
What you need to roll a joint
To roll a joint, you’ll need to assemble a handful of essential materials. First, select your favorite cannabis strain and set aside the amount of flower you want to smoke, typically about a third of a gram. Use a grinder to break apart your bud evenly. A rolling tray will help you keep your workspace neat and tidy.
To roll a joint, you’ll need to assemble a handful of essential materials: your favorite cannabis strain, a grinder, a rolling tray, joint paper, and a filter/crutch. Photo by: Gina Coleman/Weedmaps
Round up your joint paper of choice. Dispensaries and smoke shops offer hemp, unbleached paper, and other materials to fit various preferences. Grab a filter, also called a crutch, or a thick piece of paper to create one, and you’ve got everything you need to roll a joint. If you don’t have a glass crutch handy, it’s easy to make a crutch on your own.
How to roll a joint
Step 1: Grind the cannabis
Use a grinder to grind up and separate the flower evenly. A grinder produces a consistent size and texture, which provides a smoother, more even smoke. If you don’t have a grinder, pick the bud apart with your fingers. Make the pieces more or less the same small size and work gently to minimize damage to the cannabis’ trichomes.
Use a grinder to grind up and separate the flower evenly. Photo by: Gina Coleman/Weedmaps
Step 2: Make a crutch
Many smoke shops sell pre-made crutches to serve as the mouthpiece of a joint. While crutches aren’t essential, they help reinforce the mouthpiece and make a joint easier to hold. Crutches also boost the airflow through a joint and minimize the risk of burning your lips or inhaling tiny bits of marijuana during a hit.
To make a crutch, fold a piece of thick paper or cardstock into an accordion shape then wrap the last bit of paper around the accordion part. Photo by: Gina Coleman/Weedmaps
To make a crutch, grab a piece of thick paper or cardstock and rip off a rectangle-shaped strip about the width of your joint’s mouthpiece. Fold most of the paper into an accordion shape then wrap the last bit of paper around the accordion part.
Step 3: Load the joint
Lay the rolling paper on the tray with the adhesive side facing away from you. Position the crutch where you want the mouthpiece to be and sprinkle marijuana onto the paper. Evenly spread the flower throughout the joint and avoid overstuffing it.
Evenly spread the flower throughout the joint and avoid overstuffing it. Photo by: Gina Coleman/Weedmaps
To roll a cone joint, sprinkle less weed near the mouthpiece and more towards the tip, tapering as you move.
Step 4: Roll the joint
It’s finally time to get rolling. Use your thumb and index finger to pinch the paper into a taco shape, sifting the paper back and forth to distribute the bud evenly. It’s okay if some flower falls out,you can stuff it in later. Work the weed into a cylinder shape, not so loose that it burns unevenly and not so tight that it restricts airflow.
Use your thumb and index finger to pinch the paper into a taco shape, sifting the paper back and forth to distribute the bud evenly. Photo by: Gina Coleman/Weedmaps
Tuck one side of the rolling paper into the joint and slowly roll it back towards the adhesive side, tucking in the bud as you go. Lick or wet the sticky adhesive and start at the mouthpiece end to slowly seal the joint.
Lick or wet the sticky adhesive and start at the mouthpiece end to slowly seal the joint. Photo by: Gina Coleman/Weedmaps
Once it’s sealed, grab a pen, toothpick, or another long cylindrical object to pack down the cannabis towards the mouthpiece. This is where you can add back any weed lost during the rolling phase.
Once it’s sealed, grab a pen, toothpick, or another long cylindrical object to pack down the cannabis towards the mouthpiece. Photo by: Gina Coleman/Weedmaps
Step 5: Seal the deal
Twist the extra paper at the tip of the joint to seal everything shut.
Twist the extra paper at the tip of the joint to seal everything shut. Photo by: Gina Coleman/Weedmaps
Finally, it’s time to spark up your joint and inhale through the mouthpiece. Enjoy!
Finally, it’s time to spark up your joint and inhale through the mouthpiece. Photo by: Gina Coleman/Weedmaps
Why do people like joints?
Cannabis consumers love joints for a wide variety of reasons. For many, joints serve as the entry point into the cannabis world and smoking. Some like the way terpenes smell as the joint smoke spirals into the air. Others appreciate the fact you only need to spark up once to enjoy a joint, compared to the constant lighting of a pipe or the heavy-duty torching that dabs require.
Joints are also highly mobile, easy to share in a group setting, and easy to store if you want to smoke some and save the rest for a later day. According to an analysis by the RAND Corporation, an average joint fits about 0.32 grams of weed, making it a potent cannabis experience for an individual or enough for everyone when shared in a session. When completed, there’s little to clean up except for the roach and some ash.
Many joint rollers find the process of crafting joints therapeutic and consider the ritual an essential part of their consumption process.
Why do people hate joints?
Joints aren’t the most efficient way of consuming weed, and many users choose other methods to stretch their budget and maximize the experience of their bud. If you don’t smoke a joint fast, the flame on the tip will burn off precious trichomes and terpenes. Joints aren’t the best choice for marijuana consumers seeking a leisurely, lengthy smoking session.How to roll a joint Copy article link to clipboard. Link copied to clipboard. Contents What is a joint? What you need to roll a joint How to roll a joint Why do ]]>