Categories
BLOG

vapor pen holder

EGO Vape Pen Silicone Holder Stand

Adding product to your cart

This silicone vape holder stand with suction protects your vape and atomizer from falling over and helps minimize any leakage.

Main Benefits:

  • Prevents your vape from falling over and scratching or breaking glass tanks.
  • Suction feature keeps it in one place.
  • Lots of cool and vibrant colors to chose from.

Works with EGO style vapes such as:

  • EGO
  • EVOD
  • Twist
  • V-Pen
  • AND MORE

*If we run out of your color, the closest substitute color will be sent.

Main Benefits:

  • Prevents your vape from falling over and scratching or breaking glass tanks.
  • Suction feature keeps it in one place.
  • Lots of cool and vibrant colors to chose from.

Works with EGO style vapes such as:

  • EGO
  • EVOD
  • Twist
  • V-Pen
  • AND MORE

*If we run out of your color, the closest substitute color will be sent.

This silicone vape holder stand with suction protects your vape and atomizer from falling over and helps minimize any leakage. Main Benefits: Prevents your vape from falling over and scratching or breaking glass tanks. Suction feature keeps it in one place. Lots of cool and vibrant colors to chose from. Works with EGO

vape pen holder

Vape pen holder for a 15mm and 20mm diameter battery holders. . It also is recessed to keep and spilled or leaked fluid in the holder.

Vape pen/eCig holder for vertical mounting on night stand or cabinet. Attach with double-sided sponge tape. . Sized for eGo type pen with a 650-1300mAh battery size.

Simple vape pen holder. Use some good 3M double sided tape on the flat part and use it in your house or auto(PLA prolly wont hold up in your car due to heat). STL is in INCHES so if your slicer uses metric you will need to scale by +2540 % to reach.

When 1 vape just is not enough. . Mix flavors get baked! 3 pen holder coming soon.

A base I made to hold my vape pen, along with three small 510 atomizers, and a slot to hold the USB charger

this vape pen sleeve fits snug around the battery and acts as a stand to keep upright when not using . . this fits snug ment for a 14mm diameter battery they are very common .

Made this to hold my vape pen on my car dash. Attach using a trimmed 3M Command Strip. . I apologize for the image, don’t know why it looks ugly.

Edit it online https://www.tinkercad.com/things/89MMZyfn11T I made this for my wife to hold her vape pen by adding the tube to a model of Onix. . By adding a small disc of craft foam about 1/8th inch thick to the bottom of the tube I got rid of that.

Made to fit my brothers CBD Vape Pen. Internal Diameter of 11.4mm and 16mm deep. 35mm base. printed just fine at .2mm height. I can remix if needed for a different size. Thanks all. I Must add that this turned out too small compared to the.

Converted the bamboo pen holder into a bamboo vape pen holder. Extended the size of the base to increase stability. Increased the size of the shell and made solid to strengthen. Added 2 torus at entry and inside base to provide 2 locations to grip.

I made this holder for larger pens but it can also be used to hold vaping pen batteries as well. Use a very low infill like 8-10% is plenty. . Make walls from 1.5-2MM for strength.

Organizer for skinny vape pen, and cartridges. . Has slots for the cartridge information so you can remember which is which.

Summary This works with the Kanger Tech EVOD Vape pen. It keeps the juice from settling on our atomizer wicks for longer atomizer use. The holder works as long as you have a tank that has the same diameter. I have a Mini Kanger Protank 2 with mine.

This works with the Kanger Tech EVOD Vape pen. It keeps the juice from settling on our atomizer wicks for longer atomizer use. The holder works as long as you have a tank that has the same diameter. I have a Mini Kanger Protank 2 with mine. . Edit it.

I made this holder for large fountain pens but was told it would be perfect for vaping pens (batteries). I made another version that is more of a desk version but this one I wanted to make for my end table that doesn’t have much room on it. It can be.

I’ve gotten tired of not having a juno holder either in the car, consuming easy access to my cup holder(s). Or the fact that if you lay it down sideways, spitting juice would be the outcome. . so I design this to be a couple of things: – a good.

I haven’t made this yet, but should work out okay. Let me know if the model needs adjusting. . Holes in the plates are are 10mm and 7mm.

I couldn’t find a holder that worked quite for what I wanted, so I made a simple cartridge and vape pen holder. I have two vape pens of different sizes – one has a diameter of 17mm and the other is 11mm. I’ve oversized each socket by a mm to allow.

This is my attempt to keep organised with my vape and some juices I get in a small tank. It holds 2 small tanks, a back-up battery and the main pen. The two big holes are 13mm in diameter and the small ones are 9mm diameter approx. It took me.

cartman ecig vape pen desktop charger holder with globe hole

Cup holder designed for my friends Mazda for his Voopoo Drag and pen vape

3D printed, rugged case-holder for Vape Pen 22 vaper. About the sizes: Acording to your printer resolution and precision you may want to choose a tight or loose size for the case. Multiple hole sizes are aviable. The Vape Pen 22 has a 22 mm.

Vape Pen Holder for a Smok Prince Vape Pen

This is a little model I created to help me keep from mixing up separate flavors and hold all my different batteries. . Designed from scratch by me but inspired by shadowck5000’s “Vape Pen Holder with Cartridge Info.”

remix Vape pen base

A holder for the tank on my vape

A stand for my vape pen by weirdhouse

Vape Pen Stand for smok v8 baby stick.

This was my first design for something to keep my Vape Pens from being knocked off my desk. It holds a standard Kangartech EVOD-C quite well; but the I-Pow won’t fit correctly. . The diameter is just shy of 15 MM.

A simple container for your vape. . Based off the Beyond Vape Ego.

vape pen holder ✅. Vape pen holder for a 15mm and 20mm diameter battery holders. …It also is recessed to keep and spilled or leaked fluid in the holder.