HOW TO CLEAN A TOBACCO PIPE
First of all the necessary and indispensable accessories for pipes:
Pipe cleaning elements, the reamer, a few cotton swabs, a pipe cleaner, rubbing (surgical) alcohol, and a soft cloth;
It is necessary to regularly pass the pipe-cleaner through the tobacco pipe, the bit (bore) and the stem (filter) to rid it of humidity, the tar and nicotine. The frequency will vary according to the type of tobacco smoked. You may also soak the pipe-cleaner in a little alcohol for deeper cleaning.
The exterior of the pipe may also be waxed slightly using beeswax, or even better, Renaissance wax
which you can find easily (through eBay).
For those using 9mm filters it is important not to forget the interior of the mortise (see photo) this is done using a cotton swab. Actually, this is the area where tar and nicotine accumulate most rapidly.
The pipe-cleaner is used to tamper the embers, unblock the stem and mouthpiece, and remove the dottle remaining in the chamber. It also allows scraping the surface of the heel of the chamber but only with limited efficiency.
This regular but necessary cleaning will offer you an enhanced smoking experience.
Indispensable when the heel of the chamber is very deep (+1mm)
Attention! This operation is very dirty so allow for an adequate work space.
The reamer is an ideal tool to reduce the layer in the heel. Its use is quite straightforward: The roller screw (2) allows adjustment of the blade diameter (3) in the chamber (clockwise, the blades spread out. ) Adjust (2) in one direction or the other to allow entrance to the chamber. Turn the reamer using it to (1) scrape, and then readjust (2) to ream more deeply.
Cleaning with salt, such a practice will ensure your wooden pipe is as good as new.
Insert the pipe-cleaner into the stem as far as the mouthpiece to block it (you can pre-soak it in alcohol). Fill the chamber with salt (table or sea salt). With the help of a syringe or eye-dropper place several drops of alcohol onto the salt. Wet without soaking, do not “bathe” in the alcohol. Place your pipe straight up (make a holding bowl from aluminum foil for instance and press the pipe into it) in order not to spill the salt, and leave it to sit for 24 hours.
At the end of this period the salt will have a brownish hue.
Remove the salt and pipe-cleaner. Re-clean everything using a soft dry cloth and pipe-cleaner until there is no further trace of the operation. Leave your pipe to rest during 24 or 48 hours. Once this rest-time passes you’ll be all set to procure your pleasure anew.HOW TO CLEAN A TOBACCO PIPE First of all the necessary and indispensable accessories for pipes : Pipe cleaning elements, the reamer , a few cotton swabs, a pipe cleaner , rubbing
How to Clean a Metal Smoking Pipe
For those who aren’t as familiar with cleaning a metal smoking pipe , there’s nothing to fear. Keeping your pipe in tip-top shape is simple once you get the hang of it. In this article, we’ll guide you through the tools, tips, and ways to keep your metal smoking pipe working like a charm.
Metal Smoking Pipe Tools
Before you can get started caring for your pipe, you’ll need to gather the right equipment. To clean a metal smoking pipe, make sure you have:
- Alcohol – Isopropyl alcohol 70% is ideal, but you can also try vodka or whiskey that’s at least 140 proof. The stronger the alcohol is, the less soaking the pipe will need.
- Pipe cleaners or brushes – Although alcohol helps remove ash and grime from your pipe, you’ll need to do some scrubbing. Using a pipe cleaner or brush will allow you to remove any remnants stuck inside your metal smoking pipe.
- Cloth or rag – The metal smoking pipe you have will dictate the kind of cloth or rag you should use. For more sensitive metals that are prone to scratching, a microfibre cloth is best. More robust metal pipes can handle just about any clean rag you have.
Soaking your Metal Smoking Pipe
Soaking your pipe is the first and most important part of cleaning your pipe. Alcohol helps loosen stubborn gunk from the inside of your pipe, restoring its natural flavour and function. To soak your pipe, place your metal smoking pipe in a bowl and fill it with alcohol. For best results, the pipe should be completely covered by the alcohol. Place the bowl somewhere it won’t be disturbed and let the metal smoking pipe soak for at least 24 hours.
Removing Stuck-On Grime
In this step, you’ll need a bit of elbow grease and a lot of patience. Before you begin scrubbing, we recommend removing your screen as it’s likely to fall out during this step. Insert your pipe cleaner or brush into the shaft of the metal smoking pipe and scrub until all the grime is gone. You can repeat this second step, but if you still have grime inside your pipe after that, then we would recommend soaking it again.
Buffing and Drying
After soaking and scrubbing your pipe, you’ll need to dry and buff it. Although alcohol evaporates and leaves little to no taste behind, drying your pipe with a cloth or rag will ensure that there’s no remaining moisture. Any leftover moisture can impact a metal smoking pipe’s effectiveness. Buffing your pipe with a cloth can also help restore its glow. For best results, buff in small circular motions as that will provide an even shine.
Time to Enjoy your Metal Smoking Pipe
In good times, and especially bad times, smokers turn to their pipes for relaxation. Whether you’re a daily smoker or a social smoker, maintaining a clean pipe will ensure a consistently better smoke. With these tips, we hope that you’ll be able to take good care of your metal smoking pipe and enjoy it for years to come!Keeping your metal smoking pipe in great shape is simple once you get the hang of it. In this article, we’ll guide you through the tools, tips, and ways to keep your metal smoking pipe working like a charm. ]]>