How to Make a Quick Bong
Last Updated: July 28, 2020 References
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time.
This article has been viewed 158,876 times.
It is a somber summer night, you are at your home, and all you want to do is smoke some product. After deciding that you will take part in this act, you realize that you do not have a bong handy. Luckily, it’s a quick and easy procedure to make a homemade water bong out of a few simple and cheap materials.
About This Article
If you need something to smoke out of in a hurry, you can quickly make your own bong out of a small plastic bottle. To get started, use a knife to poke a hole that’s big enough for a pen to fit through halfway up the bottle. Make another hole near the top on the opposite side of the bottle for your carb. Then, take apart a pen and stick a socket bit into the barrel to make the bowl for your bong. Tape the barrel and bit together. Insert the pen barrel into your first hole and aim it downwards at the bottom of the bottle. Finally, fill the bottle with 2 inches of water and load the bowl with your smoking material. For more tips, including how to maintain your homemade bong, read on!
How to Make a Quick Bong. It is a somber summer night, you are at your home, and all you want to do is smoke some product. After deciding that you will take part in this act, you realize that you do not have a bong handy. Luckily, it's a…
How to build a water bottle bong
Copy article link to clipboard.
Link copied to clipboard.
- What is a water bottle bong?
- What you need to build a water bottle bong
- Step-by-step instructions to build a water bottle bong
- Why people smoke out of water bottle bongs
- Why people avoid water bottle bongs
- Bottom line
What is a water bottle bong?
Far from embodying the braindead “stoner” stereotype, the cannabis community is actually quite ingenious—especially when it comes to throwing together makeshift smoking devices. The water bottle bong is one of the best examples of this ingenuity.
A water bottle bong is exactly what it sounds like: a bong fashioned out of an old water bottle. A water bottle bong should not be your primary smoking tool. In fact, it should probably not even be a piece you use more than once. Instead, a water bottle bong is a last-ditch effort when you find yourself in a pinch and have no other way to smoke. If you find yourself in this situation, making a water bottle bong will serve as a quick, easy, and incredibly effective solution. Here’s everything you need to know to build a water bottle bong from scratch.
What you need to build a water bottle bong
- A plastic water bottle. Use one of the standard 17-ounce bottles, and avoid the smaller ones. You can also use soda bottles, but you’ll want to wash out the sticky residue first.
- Scissors, razor blade, or a sharp knife
- A pen, marker, or highlighter that you don’t mind taking apart
- Aluminum foil, the thicker the better, or a small metal pipe bowl that can fit inside the cylindrical body of your pen, marker, or highlighter
- A needle or toothpick
- A lighter, match, or hemp wick
- Your favorite cannabis strain
Step-by-step instructions to build a water bottle bong
Step 1: Prepare the plastic bottle
Find a plastic water bottle; the standard 17-ounce size works best. If you can’t find a plastic water bottle, you can also use a soda bottle. Just be sure you take some extra time to clean the inside thoroughly — you don’t want all that sticky residue from the soda getting in the way of your smoking experience. Once you’ve got a clean bottle, remove the wrapper to make it easier to work with.
Step 2: Prepare the downstem
Next, you need to make a downstem that can house some sort of bowl. To make a downstem, you’ll need to use either a regular ballpoint pen, a marker, or a highlighter. A slightly fatter marker (think the fat Crayola Magic Markers) or a thicker highlighter tend to work the best, but a normal pen is doable, too. Take apart the pen, marker, or highlighter and remove all the insides; you only need the empty cylindrical body of the pen, marker or highlighter. This empty plastic tube will serve as your downstem. Now you need to pair your downstem with a bowl.
Step 3: Make a bowl
If you happen to have a metal pipe bowl on hand, see if it fits inside the plastic cylinder from your pen, marker, or highlighter. If it fits, you’re good to go.
If the metal pipe bowl doesn’t fit, or if you don’t have a metal pipe bowl handy, use aluminum foil. Tear off a medium to large piece of foil. Fold the foil over a couple of times to make it a bit thicker and more substantial. Now place the foil over the bottom end of the cylinder from your pen, marker, or highlighter. Fold the edges of the foil down to hold it in place. Next, use a fingertip to gently press down on the foil, creating a slight indentation without tearing the foil. Use a needle or toothpick to poke three to five tiny holes in the foil. This is the bowl that will hold your herb, so make sure the holes aren’t too big, otherwise your cannabis might fall through.
Step 4: Insert the downstem
Use either scissors, a razor blade, or a knife to cut a small hole in the side of the water bottle, roughly an inch or so below the midway point. You can also use a lighter to melt a hole into the bottle; just don’t breathe in the fumes. Make the hole barely big enough for your downstem to fit inside. Once you establish a fit, insert the downstem into the bottle, at a downward angle, so that it almost reaches the bottom of the bottle.
Step 5: Make a carb hole
Rotate the bottle 90° from the downstem and make another small hole in the side of the bottle, using whatever method you used in Step 4. This will be your carb hole, so be sure it’s in a position that will let you hold the bottle comfortably with your finger placed on top of this new opening.
Step 6: Add water
With the downstem inserted down into the bottle, hold the entire device upright and carefully pour in enough water to submerge the bottom of the downstem. Once the bottom of the downstem is underwater, you’re all set.
Step 7: Pack the bowl
Grind up your bud and gently pack it into your bowl. Insert the bowl into the downstem and get ready to smoke.
Step 8: Spark up
To smoke your water bottle bong, use the regular mouth of the bottle as your mouthpiece. Hold the bottle sideways with the downstem and bowl sticking up but away from your face. Place your thumb or finger over the carb hole. Use a lighter, match, or hemp wick to ignite the marijuana. Use your lungs to pull in through the mouthpiece. As you do, the smoke will get sucked down into the bottle and begin bubbling up through the water.
Step 9: Clear the bong
When you’re ready to take a hit, remove your thumb or finger from the carb hole and pull the smoke up through the bottle and into your lungs.
Why people smoke out of water bottle bongs
The only real reason people smoke out of water bottle bongs is because they have no other — or better — smoking device on hand. A water bottle bong is a stopgap solution, not a tool for regular repeated use. You should only make and smoke out of a water bottle bong when you’re in a pinch. Otherwise, use a real glass bong.
Why people avoid water bottle bongs
Water bottle bongs are not intended to be permanent, repeat-use smoking tools for several reasons. For starters, water bottle bongs are not all that sturdy; they’re simply handmade, thrown-together smoking tools. Further, smoking out of plastic and aluminum foil is far from ideal, especially since both substances can create highly toxic fumes when burned or melted.
Smoking out of a real glass bong will always be a better, safer, cleaner, and more enjoyable way to smoke cannabis, but when you have no other options, go ahead and have fun making a water bottle bong.
A water bottle bong is exactly what it sounds like: a bong fashioned out of an old water bottle. Here's how to make and use one the next time you find yourself in a pinch.