puck rig

When you get past that initial charge, you will need to charge your battery with the included USB/AC adapter, which is extremely easy. Note that you should never use a charger that is not designed for the vape pens. Step 1 – Screw the Ego-T Vape Pen into the USB Charger.

To charge your ego t starter kit, you simply need to screw the ego-t battery into the USB charger connection. Then you attach that usb cord into the AC adapter to plug into the wall. Step 2 – Charge for a Few Hours Until Fully Charged. It may take longer if you are plugging the USB charger into the computer, so it is recommended to just charge it through the AC adapter if you want it to charge faster. It is also not recommended to leave charging overnight or to leave it charging unattended. Once you have a fully charged ego-t battery, it should last anywhere between 8-10 hours, or less if you really vape a lot.

You should be fine getting through your entire day vaping on one battery, if it is a 900mah-1100mah. You Made the Decision to Purchase an Ego T Starter Kit. So you’ve decided to purchase an ego t vape pen starter kit and you are super excited to get started with this whole vaping thing. Or maybe you’ve already been vaping for a while with a subpar vaping device like the little E-Cigs: The Cig-A-Like devices that typically don’t perform well, and now you want to move on to a better alternative, like the ego-t vape pen or any eGo Starter Kit. So you decide to go with an ego t vape pen starter kit because its one of the most popular choices of vape starter kits on the market today. After you purchase the ego t kit, you wait for the mail to come. A few days pass, and before you know it, your Vape Mail is here! You run to the mailbox, frantically open your package and you see the ego-t and all its glory. You then proceed to screw on the battery to make it a full pen. You also notice that your ego t starter kit you got from slim vape pen has free ejuice included. The first thing you want to do is get some paper towels handy just in case you spill your ejuice or get it on the side of the tank. You should also be careful not to get it on your eyes, skin, mouth etc, as you might expect. Also make sure that you always leave your ejuice and vape supplies out of reach of children and pets, as ejuice contains nicotine and is harmful (can be fatal) if ingested. Now that we got that out of the way, here are the steps to filling your ego t starter kit: Step 1 – Unscrew the Base. The first thing you need to do to fill your ego t starter kit is to simply turn the T3S clearomizer upside down and unscrew the base. The base is just the atomizer + base, which is the mechanism that turns the e juice into vapor. Place the Base / Atomizer piece to the side, until you are done filling your tank. Now take your e juice dropper bottle and fill it up with the ejuice liquid, and begin pouring it into the T3S tank from your ego t starter kit. Be careful not to get the ejuice into that middle airway hole, as that is supposed to be kept dry, as only air and vapor will pass through it. A trick to make sure you don’t get any down the airway is to just pour slowly. You want to fill your tank up almost to the top markings on the T3S clearomizer, so that you will have enough ejuice in there to last you between refills. Be careful not to fill too much, as if you go past the air hole, it will get ejuice down the airway, which is no good, because then you will have to clean your tank. Now grab that atomizer base that you took off and screw that back on to make a good seal. After this you can screw the clearomizer back onto the ego-t battery from your starter kit. Now what you want to do is let your ejuice sit in the tank for 5-10 minutes so the ejuice can soak into the wick.

This ensures you get less of that initial “breaking in” your atomizer burnt taste. Note that you may need to charge your battery first, but oftentimes they come with a little bit of a charge so you can start vaping right away! Ok everyone, this is probably one of most common problems with the eGo-T, eGo Twist, eGo-V and all other eGo, EVOD or 510 thread style batteries. There is not need to start getting frustrated right away, instead there are many different trouble shooting tips on why your eGo battery is not charging. eGo Battery Firing pin (Center Post) has e-juice on it eGo Battery Firing pin (Center Post) not connecting to charger pin eGo Battery Firing pin (Center Post) has been pushed down too far and is not making connection eGo Battery was over tightened to tank or charger which forces center post down eGo Charger connection is dirty eGo Charger is Faulty eGo Battery is Faulty. Ago Dry Herb/ Wax Battery eGo Twist Battery eGo-T Battery eGo-V Battery E-Smart Battery EVOD Battery EVOD VV Battery Vamo Battery Vision Spinner Battery 510 Thread Batteries. There are many more batteries that have the same eGo Thread as well as the 510 thread. The eGo thread is the outer ring (Thread) of your battery which connects to your atomizer and the 510 thread is the inner ring (Thread) which connects to your charger. It is important to understand why your charger might not be charging your battery and there are many reasons that it might just need a little “tweaking” as does everything with vape pens.

The first thing you want to do is make sure all your connections are clean before you attach your battery to t he charger, this will prevent any future problems of your eGo battery not charging.

Menu

Get in touch