pickle pipe walmart

Fermenting with the Pickle Pipe

When I was offered a Pickle Pipe to review, I said a quick yes. I am offered lots of things to review for this site. Many times it has absolutely nothing to do with canning. or preserving. or even homesteading skills. I turn those away. There is no point.

This one was different. This is a product that I think you will like!

The first step in the process of canning sauerkraut is to ferment your cabbage to prepare it for canning.

Making sauerkraut was the perfect time to try out this Pickle Pipe. I also figured I’d use some different methods for fermenting food and see how they compare, that is really put it to the test. The pretty blue fermenting lid in the middle. that’s the Pickle Pipe.

I already have one of those airlock fermenting lids. If you are not familiar with them, they are simply a lid fitted with an airlock that keeps oxygen out, but allows the jars to vent as food ferments. The tall thing sticking out of the white lid? That’s the airlock.

I’ve also done some fermenting by just covering my jars with cheesecloth. The gallon jar in the picture has cheesecloth laid on top of the ferment in the jar, as well as on top of the jar secured with a rubber band.

Three different methods! Let’s see how they work.

Fermenting with Cheesecloth: Results?

By far my least favorite method – the cheesecloth cover.

Fermenting is an anaerobic process. You need to keep the air out! This is why your food needs to remain under the brine. I used cheesecloth on this batch to try it out.

Didn’t work so hot.

An alternative to the cheesecloth is to use a full cabbage leaf to hold your kraut underneath and away from the air. Then use a cheesecloth or other cloth to cover the lid and keep out any unwanted visitors (bugs). This works better. but keep reading, it’s still not my favorite. There are always bits of food floating to the surface.

Most directions for sauerkraut state to keep the food under the brine and cover your jars. Then daily skim off any scum that forms. That scum thing just gets to me. I know it is normal and you can safely skim it off. But I just don’t like it. There is always that question of, is this the usual normal scum. or is this mold that indicates my batch is spoiled?

Even when I don’t get any scum, I still like it better when my jars are covered. It could be psychological, but there you go. That is where I’m at. 🙂

Another thing is the smell of fermenting. When I’m fermenting jars with just a cloth cover, my husband will come in and state, “Something stinks!” Even though it is the normal vinegary smell of fermenting, and not a spoiled smell, my family is sensitive to it.

I end up having to move my ferments outside on my front porch. In the kitchen is much more convenient.

Cheesecloth cover is a no for us.

Fermenting with an Airlock Lid: Results?

The airlock fermenting lid would be my second choice. It works, and I’ve used it with success. Better than the cloth covers for sure. As a water-dependant system, you place water in the reservoir, which keeps out oxygen, but still allows the jar to vent.

The pro: I t protects the ingredients in your jar from the external air.

The airlock sticks out above the jar and is awkward to store. A pretty minor inconvenience.

It is also hard to clean. The last time I fermented, I filled my jars a bit too full and the fermenting liquid pushed up through the airlock and spilled all over my counter. (Note to self: Do NOT fill so much!) The airlock is built so that I can rinse it, but it doesn’t really come clean. There is no way to get inside where the water (or, if you’ve overflowed, brine) is. But as I said, it does work, so I wouldn’t totally rule it out.

Fermenting with the Pickle Pipe System: Results?

My favorite method? The Pickle Pipe. Hands down. no question about it. In my opinion, it is the best Mason jar fermenting lid of the three fermenting lids I’ve used.

It is so super simple and easy. I’ve had much better luck with this little product. The Pickle Pipe is a fermenting airlock lid system produced by MasonTops, a company that is specializing in canning jar accessories. They also provide fermentation weights that they call. Pickle Pebbles.

What is the Pickle Pipe?

The lid is a silicone lid made with just the right opening to let the gasses vent out, but not allow oxygen back in the jar.

It keeps the smell out of my kitchen.

I can put it on and almost forget about the jar until it is done fermenting. (Don’t really forget about it, you do need to keep an eye on your ferments.)

This is a one-piece, silicone (FDA food grade, BPA- and pthlalate-free) airlock.

It is designed for wide mouth mason jars. Just screw it on. Depending on how much you are fermenting, you can use pints, quarts, or half-gallon size jars, as long as it is a wide mouth jar.

(I hinted to MasonTops that a lid to fit gallon jars would be a perfect next product!)

How does the Pickle Pipe work? The one-way valve only allows gas to flow one way: from inside the jar to the outside, never back.

I could see this in the lid itself as I was using it. When the ferments start, bubbling happens and the jar needs to vent. I could see the lid pushed out ever so slightly, which indicated that the jar was venting. After it had been fermenting awhile, I could actually see the lid suck down in ever so slightly. This indicated to me that it was keeping oxygen out of the jar, just the way fermenting food works! I tried to get a picture, but it is pretty slight, so I don’t know that you can really tell from the image.

Are fermentation lids airtight?

The one-way valve allows the CO2 produced while fermenting to escape (so jar does not explode!) without allowing oxygen to enter (so no mold – and that is a good thing!).

Pickle Pebbles – Fermentation Weights

The Pickle Pebble is a glass fermenting weight that came with my lids. This weight keeps your food under the brine. It is the perfect size to slip down in those straight-sided quart jars. I usually do my ferments in these smaller jars.

Sauerkraut is one thing that is done in larger jars. What I do is I use a few cabbage leaves to hold my kraut down, and then plop a weight on top of that. T he weights work with larger jars too, but not quite as well; they sometimes slip sideways.

MasonTops has come out with some new weights that are shaped with a “handle” so you can grip the glass and pull it out of the jar. The old style is just flat on both sides. I just use a butter knife to gently pull the weight up sideways so I can grab it. Not difficult, but that new handle style would be pretty handy. If you are getting some, you might as well get those.

The pickle pipe has the’s stamp of approval! We tested this item against the traditional method and an air lock when making sauerkraut. How did it stack up? Read on and see!