Quick Guide to using your Pax 3
Hey! You’re probably on this page because you made the great decision to purchase a Pax 3; a luxury vaporizer rate for both its aesthetics and performance.
We wanted to ensure that you have the best possible experience so we created this brief guide on how to to get the most out of your Pax 3,
You will have the following pieces included in the box:
- 1x PAX 3 Vaporizer
- 1x Charging Cable
- 2x Interchangeable Mouthpieces (1 Flat & 1 Raised)
- 1x Standard Oven Lid
- 1x Maintenance Kit
- 10-Year Warranty Protection
- 1x Half-Pack Oven **
- 1x Concentrate Insert **
- 1x Multi-Tool **
- 3x Screens **
** Included in Complete Kit only
Charging your Pax 3
The Pax 3 has a unique magnetic charging dock – it snaps right into place as soon as you place the charger near the port on the back of the device.
First things first, we need to charge our Pax 3 to its maximum level
You’ll know when your pax has reached a full charge when all four LEDs are white – it should take roughly two hours.
Perform a quick burnoff of the Pax 3’s oven.
Once the battery is fully charged, it is worth performing a quick ‘burn-off’ of the Pax’s oven – this will disinfect the oven and remove any residue left over from manufacturing.
To carry this out, power on the Pax by pressing the power button in the centre of the mouthpiece once.
Leave the Pax 3 oven on for five minutes; this should be enough to totally disinfect the oven.
Packing your Pax 3
Now it’s time to pack our Pax 3 and get started!
Remove the magnetic oven cover at the bottom of the Pax. Before placing any herb in the oven, first, ensure you have ground your herbs as finely as possible.
The Pax performs best when your herbs are packed firmly and the oven is at least half full.
If vaping solo we recommend you use the half-pack oven for the best experience. It comes with the complete kit or can be purchased as an extra.
Choose your mouthpiece
The Pax 3 can be used with either the flat mouthpiece that is fitted into the device or this can be swapped out for the raised mouthpiece.
The flat mouthpiece is my favourite because it is really discreet however, some prefer the natural feel of the raised mouthpiece.
Powering on your Pax 3
To turn the Pax 3 on, press the power button in the centre of the mouthpiece once – the vaporizer should immediately begin to heat up.
Whilst heating up the LEDs will pulsate with a soft purple colour and turn green when it has reached the set temperature.
Changing the temperature settings of your Pax 3
The Pax 2 has four temperature setting. To adjust the temperature you have to put your Pax into temperature mode.
To do this, when the Pax 2 in turn on, hold the power button until the LEDs turn yellow.
Now you can cycle through the four settings by pressing the power button once. Each LED corresponds to a temperature setting with 1 LED being the coolest temperature and 4 being the hottest.
To set your chosen temperature, hold the power button for an extended period again until the LEDs turn from yellow to purple or green.
Using the smartphone app to control your Pax 3
Although you can use the Pax without it, the Pax app allows a more bespoke vaping experience. It is available for both Android and iPhone and is downloaded from their app stores.
To use it, turn your phone’s Bluetooth on. Then open the app whilst powering on the Pax at the same time. It should connect automatically. if not, find the Pax 3 in your phone’s Bluetooth settings.
Further to the standard temperature controls, the Pax app allows you to set your own precise temperature settings.
Furthermore, you can change your vaping mode; a first for vaping devices. You can choose from:
- Boost – vaping with a kick! Good for water filter inhalation
- Efficiency – squeeze every last terpene out of your herbs
- Stealth – when you need to vape like a ninja! dimmed LEDs and less smell
- Flavour – prioritises taste over clouds
The app also offers tutorials about the use and cleaning of your PAX.
- Tips for getting the most out of your brand new dry herb vaporizer.
- How to best clean your vaporizer.
- Choosing the right temperature for your dry herb vaporizer.
We are sure you’ll enjoy your Pax 3!
If you have any questions at all, please contact us.Quick Guide to using your Pax 3 Hey! You're probably on this page because you made the great decision to purchase a Pax 3; a luxury vaporizer rate for both its aesthetics and performance. We wanted to ensure that you have the best possible experience so we created this brief guide on how to to get the most out of your
Pax3 Portable Charging Dock
The same charging dock idea, remixed for the new Pax3 mini-charger! This small dock was designed to securely hold your Pax3 Vaporizer and mini-charger (mini-charger not included). Perfect to safely stow the Pax3 (or Pax2) in your bag with a USB battery bank and charge on the go! This new design also includes two ferromagnetic metal washers designed to provide a surface to attract the magnetized pax3 charging dock.
Includes one 8-inch black velcro strap (pre-installed)
- Install charger into slot with USB cable facing upwards (magnets will hold charger properly positioned in dock)
- Slide Pax3 vaporizer into dock with mouthpiece facing up
- Tightly wrap velcro strap around vaporizer and dock to secure vaporizer
Dock was designed to fit a bare Pax3 and mini-charger. We cannot guarantee this dock is compatible with 3rd Party vinyl or silicone “skins” (depending on the thickness of your skin it may work or not, we haven’t tasted)
(This listing is for the 3D Printed dock itself – Vaporizer, mini-charger unit, and power bank are NOT included with purchase)
* This dock is NOT compatible with the Pax1 Vaporizer or the Pax2 original Charger Block *
OMG, does not even fit the PAX
Posted by Unknown on Sep 25th 2020
This does not even fit the PAX3 charger. This is nothing more than $0.25 worth of plastic. After removing it from the package, you can’t return it per Delta3 so I am stuck with a piece of trash I need to recycle. Delta3 is aware this does not fit yet they do not feel the need to pull it from the site, nothing like honesty in advertising.
[ EDITOR’S NOTE: This irate customer purchased the wrong size charging dock for his Pax charging block by mistake and doesn’t understand. A full refund was already issued for the confusion without any return required. PLEASE be sure to view the compatibility warnings before ordering the wrong size by mistake! ]
Keeps it in place
Posted by Unknown on Feb 18th 2020
Keeps you unit attached to cord pretty efficiently when charging
Great for what it’s designed for
Posted by Jonathan on Feb 6th 2020
Great invention for the Pax3, fits tightly when in place. I’ve found that the washers aren’t magnetic with the Pax3 slim charger, nbd.Pax3 Portable Charging Dock Product Description The same charging dock idea, remixed for the new Pax3 mini-charger! This small dock was designed to securely hold your Pax3 Vaporizer and ]]>