mflb water pipe adapter

Water Pipe Whip

Product Description

The WATER PIPE WHIP connects your LAUNCH BOX to your favorite 14mm water pipe.

The frosted, tapered, glass tip fits snugly into your own water filtration device to propel your vape experience to the next level of purity. Pull vapor from your Launch Box through your own water pipe with the WATER PIPE WHIP for an extra clean, ultra-smooth vape experience. .

The WATER PIPE WHIP comes with a small tube of non-toxic silicone gel to prevent the glass end of the whip from sticking inside the down stem of your water pipe, extending the life for your attachment.

WATER PIPE WHIP wooden connector is available in three hardwood options: bright Maple, warm Cherry, or deep Walnut.

Your WATER PIPE WHIP purchase includes:

  • (1) One Water Pipe Whip (Maple, Cherry, or Walnut connector)
    • Available in 27″ or 18″ – indicate preference in notes
  • Non-toxic silicone gel tube
  • Satin storage pouch
  • WPW Instruction Guide

Handcrafted with love in San Diego, California USA

Buy a handcrafted Water Pipe Whip to connect your Launch Box or Muad-Dib to any water pipe. Available in Maple, Cherry, and Walnut at Magic-Flight's online shop.

Magic-Flight Power Adapter & Water-Pipe Whip

In this video I talk about two popular accessories for the Magic-Flight Launch Box vaporizer: The Power Adapter and the Water-Pipe Whip.

They’re both pretty cool to use and if you vape with your MFLB mostly at home I think they’re both good investments.

I think the main negatives to each are that the cords to the power adapter are a bit cumbersome and the water-pipe whip slightly restricts the airflow which could make it a tiny bit harder to pull. Overall though I think they’re both useful and good quality.

Even if you don’t own a LB, check out the vapor clouds that start around 1:10 into the video.

I’ll start with the water-pipe whip because I have a pretty cool clip to show you of the vapor production I got while using it, but first let me show you a little bit about it and how it works.

So it’s a pretty simple add-on; you have this small end that fits inside the draw hole of the Launch Box, and you have the larger end which fits perfectly inside standard 14mm-14.5mm water pipe slide pieces. Then you have this flexible tubing connecting the two ends.

Now the reason someone would want to use this with their Launch Box is that it can help cool and condition your vapor if you find that it’s a little too hot or irritating when vaping with it normally. Another added bonus is that you get a little more visible vapor when you vape through a water pipe.

So in this clip I have my water-pipe whip hooked up to my MFLB and I’m taking about 10-15 second draws, but I cut out the wait to keep it short. you’ll see that I’m actually getting a surprising amount of visible vapor, and I do want to note that there is no combustion going on during this session. I’m using the Launch Box normally with one of the rechargeable batteries and one of the ways to make sure you get the best results with this vape is to dry your material out a lot and grind it up super fine.

Now one other added bonus of the WPW is that it actually fits a few other popular vapes in addition to the MFLB – it fits in the iolite, Wispr, and even the NO2. So if you own any of these vapes you can use the Magic-Flight water-pipe whip with them if you want.

So now let’s move on to the Power Adapter. So this can only be used with the Launch Box and basically what it does is it allows you to vape without the use of the standard rechargeable batteries that are included.

If you use your Launch Box mainly at home, and you sometimes get annoyed at recharging your batteries over and over again, this adapter may be a good investment for you. It plugs in to a standard outlet and provides instantaneous power at the touch of a button, power that you can throttle or adjust with the knob located on this piece here.

The piece that you insert into the LB is actually shaped just like the rechargeable batteries are but it has a cord coming out of it and a little black button on the end. All you do to start vaping with it is you insert the battery part and hold the button down. As soon as you hit the button you’ll see the amber light go on inside the box indicating that the heating elements are engaged.

You’ll need to keep the throttle dial close by, at least in the beginning, to fine tune the perfect intensity. It’s possible to have it set too low where you don’t get any vapor and it’s also possible to have it set too high where you material could combust if you’re not actively taking a draw.

Overall I’ve found that it works really well and it’s nice to not have to worry about batteries dying during long sessions. However, it’s not exactly as small and convenient as just using the batteries, and there’s these two long wires you have to worry about in addition to the power pack. So the benefit is not having to worry about dying batteries but the tradeoff is having some long wires to deal with. But as I mentioned earlier, if you use your Launch Box mainly at home you might get good use out of something like this.

Magic-Flight Power Adapter & Water-Pipe Whip In this video I talk about two popular accessories for the Magic-Flight Launch Box vaporizer: The Power Adapter and the Water-Pipe Whip. They’re ]]>