Categories
BLOG

how to use dr dabber boost

Dr Dabber Boost Black Edition

$169.99

About

View User Guide

Dr Dabber Boost Black Edition

Dr. Dabber have taken their popular Boost and made it even better. The new Boost Black Edition comes with 3 nails which are 50% larger than on the original Boost which means you can do some massive dabs and create huge clouds!

The 3 nails it comes with are quartz, titanium and ceramic which allows you to customize it to your flavor and temperature preferences. The smart stainless steel magnetic carb cap and tool allows you to drop your dab and then cap it off without having to switch hands.

The heating element can heat the nails in as little as 25 seconds (Ceramic/Quartz 600°F, Titanium 610°F) and is fully replaceable so there’s no need to replace the whole unit if anything happens. The glass water attachment uses an inline diffuser to break up the bubbles as much as possible and provide optimum cooling and filtration of your smoke before it is inhaled through the flared mouthpiece.

Included is a magnetic stand which holds the unit perfectly upright when in use to prevent stressing the glass. Everything comes presented in a protective hinged casing lined with dimpled foam.

This unit covered by a one year ‘No Questions Asked’ warranty on electronic components & battery.

Customer Reviews

Read what our customers had to say about this product. These reviews do not represent the views of CannMart. Customer reviews are not intended to be a substitute for medical advice, diagnosis, or treatment and not intended to cover all possible uses, directions, precautions, or adverse effects.

We are Canada’s premiere sales-only licensed producer. Buy cannabis online including Indica, Sativa, Hybrid, CBD, THC, vaporizers & accessories. Legal. Medical.

How to use dr dabber boost

No Products in the Cart

title

  • details
  • Sign In
  • Register
  • View Cart
  • Home
  • Boost: Black Edition Support

Swapping your Boost Nail
Unscrew Nail: Turn counterclockwise to unscrew nail, then lift nail to remove.
Lower nail and rotate clockwise to screw nail onto eRIG™.
*WARNING: DO NOT ATTEMPT TO REMOVE NAIL WHEN HOT.

Boost Glass Removal
Between your index finger and your thumb, firmly hold the base of the glass unit AS WELL AS the glass ring that attaches to the device, then push down with caution until the attachment is flush with the lip of the Boost unit.

Do not hold from base alone (water chamber) as the joint may break when attaching the glass. Remove glass with a straight up and down motion. Try not to twist. Hold the glass attachment by the connection port.

Cleaning your Glass attachment
To clean glass attachment, first remove the glass attachment from the eRig, then slowly pour 99% isopropyl alcohol into the mouthpiece until the unit is about 1/4 full.

Shake the attachment gently until clean. To rinse out the alcohol, pour water into the top (mouthpiece) until all alcohol is flushed out of the bottom of the attachment.

To remove all water from device, blow through mouthpiece and shake gently.

Charging your boost
Insert the Micro USB charger into the side of the Boost, then insert the other side of the charger into a USB port or AC adapter.

The power button shows a purple light when the device is being charged. A green light indicates charging is complete. Due to the size of the battery, it is recommended to charge 6-8 hours or overnight on an AC adapter to charge fully.

Try to remove the charging cord as soon as the unit is fully charged, as the cord will not stop the trickle down effect, meaning it will slowly start to lose power over time after a full charge, while plugged in. You can always just unplug and plug the unit back in to check if it needs a few more minutes for a full charge.

Please, be advised our charger for the Boost will charge the battery to about 20 to 30 cycles. If you use an external 18650 battery charger, you will get an approximately 50 cycles. This happens for all USB chargers. They do not put out enough amps to get the battery to its full performance. We use these chargers for the convenience it provides with today’s technology.

How to use your Boost Black Edition
1. Load Water (Remove glass before loading)
2. Click button * 3 times for titanium nail * 5 times for ceramic nail
3. Load product on tip of tool
4. Touch tip of the tool to nail once light changes color, then begin to inhale through glass mouthpiece.
5. Once all product has melted off of tool, flip tool around and place carb cap on top of the nail to increase vapor density.(Generally 3-4 seconds)

Is there a warranty on my boost Black Edition
We offer a 1 year warranty on all our products.

The warranty on the Boost covers the battery, charger and all electrical components for one year. Glass is not covered under warranty.

If you have any issues with your product, please do not hesitate to contact us as we are happy to assist you in finding a solution. If you have a warranty issue, just email us at [email protected] and we will assess your case. If the component cannot be fixed, we will initiate the replacement/return process.

Boost Black Edition Instruciton Manual
Boost Black Edition Instruciton Manual

Swapping your Boost Nail Unscrew Nail: Turn counterclockwise to unscrew nail, then lift nail to remove. Lower nail and rotate clockwise to screw nail onto eRIG™. *WARNING: DO NOT ATTEMPT TO REMOVE NAIL WHEN HOT. Boost Glass Removal Between your index finger and your thumb, firmly hold the base of the glass unit AS WE