how to use atmos vape pen

How do you turn on a Atmos vape?

Herein, how do you turn on a Atmos battery?

Press the power button 5x to turn on the battery. Press the power button 3x to cycle through the voltage settings. Once the voltage has been selected, inhale from the mouthpiece of your cartridge while holding down the battery’s power button.

Furthermore, how long does an Atmos pen take to charge? about 2-3 hours

Hereof, why is my Atmos pen not working?

1. Make Sure Your Vape Pen Battery Is On. An often-overlooked feature of the Atmos vaporizer batteries is that 5 rapid clicks of the power button will turn the device on and off. It’s possible you may have turned your battery off without even noticing it, causing it not to power your heating chamber.

Does the Atmos jump get you high?

Like most portable vape pens, the Atmos Jump has a single heating unit with an indicator light to notify you when the heating element is running. So while you may see some weak clouds initially, don’t get frustrated and vape all the way to the end. The Atmos Jump does well with clouds, but they’re not its high point.

Top power on your Atmos Jump all you have to do is press the power button down three times consecutively in a row and the indicator light will turn a solid green color to let you know that the vape pen is heating up.

How to Use, Clean and Maintain Your Atmos Rx Vaporizer

Because the best-selling vape pen deserves the best care and attention from you, our vaping enthusiasts, we’re listing down all things you need to know about taking care of your Atmos Raw, from using it the first time to cleaning it — all of these to make your personal vaporizer last a very long time.

Let’s start:

About the Atmos RX Vaporizer

This is probably the most famous and perhaps, the best vaporizer in the world, with most of our sales coming from orders for this vape pen.

If you want to know why, the answer may lie on the vaporizer’s very simple yet streamlined, lightweight and overall cool design.

At first glance, you’d barely notice that it actually is a vaporizer, measuring only five inches tall and about half an inch in diameter.

And you can be as discreet or colorful as you want with the Atos Raw (Rx) vaporizer’s seven color options: black, gray, blue, green, white, red and pink.

Inside this vaporizer pen sports premium quality materials and craftsmanship, featuring a heating coil made of high-grade materials to make sure only the flavors and essences from the herbs vaporize.

This means that every draw you take from the Atmos Raw is pure, with no plastic or strange smell usually present in cheap vaporizers.

Atmos RX Basic Parts

To understand how the Atmos Raw vape pen works, let’s get into the basic parts and how each one functions. First is the battery component, a rechargeable Lithium type that provides up to 72 hours of use and takes only up to two hours to recharge fully.

The next part is the heating chamber, which houses the heating coil connected to the power source.

The Atmos RX is well known for its very fast heating speed of five seconds. Also, the heating element itself is made of ceramic materials for that true vaping experience.

Then comes the chamber connector, which houses the ceramic and mesh filters, used to separate the herbs from the heating coil.

The mouthpiece of the RX, which is made of rubber, easily connects to the tip of the chamber connector.

Screw these 3 parts together before use. It’s as easy as that.

Atmos Raw Vaporizer Accessories and Parts

Make sure you received the following parts and accessories:

  1. Cleaning brush tool
  2. Packing tool
  3. Spring
  4. Ceramic filter
  5. Mesh filter
  6. Rubber mouthpiece. Though not seriously essential, these can significantly improve your vaping experience and maintenance.

Using the Atmos Raw Vaporizer

For the First Time

After unboxing the Atmos RX kit:

#1: Screw and place the parts properly together as indicated in the manual.

#2: Charge the battery for approximately two hours. Once the battery is full, the USB charger light will turn green.

#3: Remove the chamber connector from the heating chamber and place your dry, ground botanicals into the heating chamber. Make sure to leave space for air to pass through and for the dry herbs to mix well together.

#4: Once done, screw the chamber connector to the heating chamber.

#5: To turn the vaporizer on, press the power button quickly up to five times. This is one safety feature to keep it from accidentally turning on while keeping in your pocket or bag.

#6: Once you turn it on, press and hold the power button to heat up the device as you draw vapors from the mouthpiece.

You are now ready to vape!

Cleaning the Atmos Raw Vaporizer and Keeping It in Good Shape

#1: Use only a clean cotton swab or cloth for wiping the external and internal parts of the vaporizer.

#2: When removing residues from the ceramic filter, use a pin or a paper clip to push it within the holes to clear airways.

#3: Use the cloth or swab to clean the filters.

#4: Use the same cotton swab to clean the mouthpiece and the heating chamber. Make sure not to poke the heating coil to prevent damage and voided warranty.

Do’s and Don’ts

Atmos RX is designed for dry herbs and oil with the proper attachment. Do not include stems, seeds or liquids so as not to damage the sensitive heating coil.

While vaporizing, regularly rotate the herbs using the packing tool to evenly spread and expose the materials to the heat source.

After using the Atmos Raw vaporizer, do not touch any of the internal parts for about two minutes.

Also, never use sharp objects or any materials not recommended by Atmos when replacing or cleaning your vape pen. With proper care, you’re sure to have your Atmos RX vaporizer for a very long time with the warranty fully maximized.

Want to know more about the Atmos RX vaporizer? Read more from our blog page.

Atmos RX, from using it the first time to cleaning it — all of these to make your favorite vaporizer last a very long time. Read on to learn more! ]]>