how to clean burnt glass pipe

The Ultimate Guide: How to Clean Your Bong, Glass Pipe, and Bubblers

When it comes to smoking, glass is one of the most preferable choices among all materials. Whether you are using a glass pipe, a bong, or a dab rig, it will get dirty after some time. That’s because gunk builds up over the time from all the smokes and burnt materials. Not only that you may find your piece with a clogged airflow, but it will not taste as fresh as once it was. More towards that, it can increase the chances of growing molds and bacterias, which is extremely harmful to health. That’s why we would like to share with you a few tips on dealing with the mess.

There are few major hurdles you will find when it comes to cleaning a glass pipe or a bong. A common example is that you will find a dirty spot very hard to reach, it could be the inside of the glass pipe or the percolators of the bong. That’s why the main method we would like to introduce by using the right solution and keeping it simple by following the rules of thumb: soak it, rinse it, and scrub it. This will help you to clean a majority of the area of your glass pipes or bongs.

Choosing the cleaning solution

When it comes to choosing your perfect solution, there are two main combinations we recommend. Either to use isopropyl alcohol with salt or to use white vinegar with baking soda.

Quick and aggressive: isopropyl alcohol with salt

If you are looking to speed-clean your dirty glass pipes, isopropyl alcohol with salt is the best option. We recommend using any rubbing alcohol you could buy from a pharmacist or supermarket with at least 70% alcohol, preferably 91% of alcohol. The higher the percentage of the alcohol content, the quicker the cleanse you will likely to get. Salt or essentially sodium, acting as a rough medium not only helps to remove the tars physically but also covers the tough part of the gunk. When it reacts with alcohol, it creates bubbles of hydrogen gas and a corrosive sodium ethoxide. This process helps with softening the tars and the remain solution is also great for cleaning the residuals. Any iodine-free table salt will work just fine. We highly suggest choosing fine salt over rock salt, since smaller salt can cover more areas.
However, using isopropyl alcohol can be a little dangerous. Inhaling alcohol with high percentage content is bad for health. 70% of alcohol is also highly flammable. You will need to make sure giving a thorough rinse with water after cleaning with alcohol because the remaining alcohol on your gears can catch fire in the worst case scenario. Nobody wants to set fires on your bongs or glass pipes when you just want to sit back and chill, what a disaster would that be just by imagining.

Ease of cleaning: ★★★★
Effortlessness: ★★★★
Health and Safety Hazards: ★★★★
Cleaning time: Short

Safe and house-friendly: white vinegar + baking soda

If health and safety is your main concern, you may want to look for these two items you can find in your house: White Vinegar and Baking Soda. Vinegar is the perfect remover for resin and wax, it is also a natural deodorizer, while baking soda acts as a water softener. When you try to mix baking soda with vinegar, it immediately creates a frizzly reaction that produces gas carbon dioxide and slightly abrasive solution. This helps to cut through any forms of grease and leave your bongs or glass pipes gleaming. It may not work as fast as using alcohol, but It’s 100% safe with zero hazards. Unlike alcohol, it absorbs odors leaving with no smells on your glass pipe.

Ease of cleaning: ★★★
Effortlessness: ★★★
Health and Safety Hazards: None
Cleaning time: Allow at least 1 to 2 hours for soaking

Choosing your cleaning equipment

Besides the cleaning solution, you may also require two other items to help you clean:

    A Ziploc bag or a plastic food container: This is perfect for cleaning a glass pipe, bubbler, bowl piece or any attachments of your bongs and dab rigs.

Cotton tip or brush: Some gunks may be stubborn to come off, that’s why you may need a little physical assistance.

How do you clean them?

Using a Ziploc bag for cleaning glass pipes, bong bowl, or other attachment

Cleaning bongs and dab rigs

What we do recommend

The first thing we do recommend is not to leave your bong water overnight.

We would also recommend cleaning your glass pipes or bongs daily, the longer you leave it dirty the more difficult to clean. It only takes 10 minutes and you will appreciate it.

Simple ways for cleaning a dirty bong, dirty glass pipe, dirty bubbler, dirty glass spoon, dirty weed bowl, dirty percolators, and any other bong attachments. How do you remove tars and resins off your bong, glass pipes, bowl pieces, and bubblers. Built-in ash-catchers and built-in percolators can be clean easily with a simple few steps