how to clean a spoon pipe


  • Uncategorized
  • //
  • December 18, 2018
  • //
  • Comments
  • //

There isn’t a better feeling than taking a deep inhale from your pristine glass spoon pipe, all the flavors of your dry herb are fully experienced and there is no risk of that pesky “ash blast” that can sometimes sully your draw.

Now fast forward a few months.

Your pipe is caked in resin, the once clear glass is shrouded in filth and every hit tastes like the same old, brown dry herb as before. What happened? How did you get to this point? And more importantly, how can you get your spoon pipe back to its glory days?

What have you done?!

There are a few different ways to clean a glass spoon pipe so we’re going to go through the most tried and true methods that have stood the test of time. It should be noted none of these methods is particularly “better” than the others, some people just like to clean things a certain way.

Soak Based Method

This is one of the more classic ways to clean a glass spoon pipe. All you need to make an effective homemade cleaning solution is salt and isopropyl rubbing alcohol. The salt can be regular table salt or rock salt, but the isopropyl alcohol should be 90% alcohol or more to ensure a thorough cleaning. Your local corner store should have both of these readily available. Grab a bowl and add the isopropyl alcohol and salt to the point where your glass spoon pipe will be fully submerged. From here you just let your piece soak; the longer it soaks the cleaner it will get, but if you’re in a time crunch 1 hour of soak time will get the job done (filth level permitting).

It looks gross, but it’s working

Once you’ve taken the spoon pipe out of its solution give it a gentle shake to remove all of the liquid; an extra tap on the counter will help to dislodge any pesky resin that might be still stuck inside. If there is a particular spot that isn’t getting clean take a pipe cleaner or q-tip soaked in isopropyl alcohol and scrub the problem area manually. The more often you clean your spoon pipe the less you’ll have to spot clean after the initial soak.

Once you’re satisfied with the cleanliness level of your glass spoon pipe rinse it with hot water to remove any remaining isopropyl alcohol solution, then rinse with cold water to prevent any fogging. Let your piece fully dry before use and once that is done your pipe is back to full health.

Shake Based Method

The shake method is the fastest way to clean your glass spoon pipe. First make sure any loose dry herb or resin chunks are removed, a light tap on the counter or against your hand into the trash can will get rid of any large chunks. Similar to the soak based method, mix up a solution of isopropyl alcohol and salt. After you’ve concocted your solution fill your spoon pipe a little more than halfway with the liquid making sure all holes are covered.

After you’ve covered any potential leak spots, shake your solution-filled spoon pipe vigorously but be careful to not go full out and risk losing your grip and hurling your spoon pipe across the room. It is also wise to avoid shaking your pipe around any hard surfaces that could break it or near any fabrics that could be stained by the dirty solution that could potentially leak out. As your shaking your pipe the solution should be able to break up resin, shake for around 3 minutes and then empty the pipe in your sink while you run hot water (this helps with smell).

A quick rinse will help with smell

You might have to refill the pipe with the solution if you’re dealing with a particularly dirty spoon pipe. Do this as many times as needed until you’re satisfied. Much like soak based method, there might be problem areas that need spot cleaning. Address these as needed and let your pipe dry. Then you’re good to go.


If all goes well, this will be your final result

Don’t feel bad if you’ve got a dirty glass spoon pipe, we’ve all been there. If your pipe needs some TLC, give it a soak or a shake and watch the resin melt away to bring your spoon pipe back to its glory days. A clean pipe means a better session. So take some time every week or so to ensure your glass spoon pipe is performing at its full potential.

SPOONPIPE Uncategorized // December 18, 2018 // Comments // There isn’t a better feeling than taking a deep inhale from your pristine glass spoon pipe, all the

How to Clean a Glass Pipe in Less Than 3 Minutes – The Ultimate Guide!

Glass pipes are the preferred smoking piece for stoners. They hit smooth; come in a variety of shapes, styles, and colours; and they have the awesome effect of colouring up as they get dirty. It’s because of this last feature that many stoners don’t think to clean their glass weed pipes, but knowing how to clean a glass pipe is a necessary part of proper pipe maintenance.

The thing inside your glass pipes that causes them to colour up is resin, which leads to clogs and needs to be cleaned every so often so your pipe is up to peak performance. There are a wide variety of options for how to clean resin:

  • Epsom salt cleaning – epsom salt and rubbing alcohol
  • Sea salt is another coarse salt option. Thanks to the large grains, it’s a more highly recommended cleaning option than table salt.
  • Smoking pipe cleaning kit (purchased; specifically designed for marijuana pipes)
  • Rubbing alcohol, dish soap, and hot water
  • Clean pipe hydrogen peroxide
  • Mile high soap
  • Denture tablets are rumored to work (though we won’t venture into that here)
  • Acetone
  • Hot water to rinse whatever cleaning supplies off of your glass when you’re done!

Those are just a few of the many ways people have found to successfully clean a glass pipe. It’s important to note that just because it was effective in cleaning the pipe, doesn’t mean it’s safe to use on something you’re planning to smoke out of or that it’s the cheapest or easiest method. Leftover cleaner that’s toxic is not something you want to inhale with your kush.

Oh, you like quality hand pipes that you can turn to in your times of need? Rest your weary lips on Grav’s Large Spoon Pipe and let it carry you off into a place of great respite.

There are many videos online to help guide you through the important process of pipe cleaning. Here’s one of our favourites! They combine some isopropyl alcohol with some coarse salt in a plastic bag, shake the bag (drink some beer), and voila! A beautiful, clean glass pipe. Rinse with hot water and fill your precious glass back up with some tasty kush! You’ll find another video at the bottom of the article, too:

In this article, we’ll point you in the right direction for safe and easy pipe cleaning and provide you with a handy list of dos and don’ts.

From the simple spoon pipe like the one shared above to more innovative glass pipes, Grav has got you covered.

For a cross between simple and innovative, try out their Pebble Spoon. It’s super portable and durable, so it can be your new favourite travel buddy!

Once your resin builds up like this you know it’s time for a cleaning! @Alamy

What’s the best method to clean a glass pipe?

As we said above, just because a method is effective, doesn’t mean it’s safe or wise. We recommend not using products you don’t feel comfortable inhaling. For example, you’d probably feel a little uncomfortable inhaling something like Home Depot acetone. Not even boiling water could make us want to light our pipe back up after it has been shook around in a ziploc bag with that!

While you’re always instructed to do your best to rinse the pipe thoroughly with hot water or, better yet, boiling water after cleaning with these products, you can never be too sure. We’ve got tips on how to clean a pipe without alcohol written below and in videos!

We recommend using the vinegar and baking soda method. This method uses 100% safe products that most people have in their homes already, like cotton swaps and the same plastic bag you’d put your sandwich in, and are inexpensive. Vinegar is also a natural odor-absorber, meaning you’re also working to remove the smell from your no-longer dirty pipe.

Looking to step up your pipe game? Need the perfect gift for your nature-loving toker friend?

Empire Glassworks’s Beehive Handpipe is not only beautiful, with lots of detail in the little glass bees, but it’s also super functional. This is definitely worth the short time the cleaning process will take!

How to clean a glass pipe: vinegar and baking soda solution

Whether you’re trying to figure out how to clean glass bong or how to clean glass pipe, this method is the most effective, cheapest, and safest method for cleaning a glass piece without alcohol or other harsh chemicals.

What you need:

  • White vinegar
  • Baking soda
  • Plastic container like Tupperware
  • Bong brush, pipe cleaner, or cotton swab (maybe let’s make it cotton swabs to be safe!)

Step One: Soaking your pipe

Place your pipe in the plastic bag or container and cover it in a fine layer of baking soda, making sure to cover as much of the pipe as possible with a thorough coating. Then, fill the container with your white vinegar and make sure you seal it up tightly. Careful! There will be a bubbly reaction when the two substances meet!

Leave it soaking for about 30 minutes, but if it’s seen some serious mileage, you may want to leave it longer. Once it’s done soaking, give it a good shake to ensure the solution reaches each and every nook and cranny of the pipe. If the pipe has been well maintained, this should be an effective method for how to dissolve resin.

Step Two: Using pipe cleaners, a cotton swab, or a bong brush to remove resin

Sometimes, if you’ve got an extra dirty pipe, the soaking method alone won’t rid you of the resin problems in a weed bowl. If you need to figure out how to clean resin out of a glass bowl or, heaven forbid, how to scrape resin from a bowl, you’ll need the tools we mentioned above.

Start with gently scrubbing to try to remove the resin, but sometimes that won’t cut it. You may need to scrape the resin off with a paper clip or safety pin or even purchase a bong cleaner or other weed-specific cleaner.

Step Three: Rinse the bowl thoroughly

The last step in how to clean a bowl involves thoroughly rinsing your pipe in super hot water, as hot as you can stand. We recommend using thick dish washing gloves to ensure you have a thick layer so you can handle hotter water. You want to be sure you thoroughly rinse your piece out so that no solution remains. Then, set your piece out to dry.

For a beautifully made pipe with a bit of a Sherlock twist, try the Chameleon Glass Sherlock Flamethrower glass pipe.

Not only is it easy to use, but it’s easy to clean no matter which cleaning solution you use. It’s also high quality at a very affordable price.

Taking care of your glass pipe doesn't have to be a chore! In this article we share three easy steps you can take that will have your pipe back in tip top shape in no time! Even better? They're good for both your pipe and YOU, who, when cleaning is complete, needs to know you're not inhaling harsh cleaning products.