How to clean a dab rig
Copy article link to clipboard.
Link copied to clipboard.
- What you’ll need
- Cleaning your dab rig step-by-step
- Collecting reclaim
As dabbing becomes one of the most popular consumption methods of the modern weed market, the dab rig — a water pipe used for vaporizing cannabis concentrates — has become a staple of the modern smoking device lineup. A dab rig serves the same function as a bong, filtering concentrate vapor through water at its base. Dab rigs are typically smaller than bongs, providing less drag so the vapor travels to the lungs more quickly and retains potency.
A dab rig filters concentrate vapor through water at the base, then up the neck of the rig and through the mouthpiece. Photo by: Gina Coleman/Weedmaps
Similarly to a bong, a dab rig filters concentrate vapor through water at the base, then up the neck of the rig and through the mouthpiece. In the place of a traditional bowl for smoking dry flower, the dab rig is connected to a dab nail or banger, where a dab of concentrate is placed to inhale the resulting vapor.
When regularly maintained, dab rig cleaning can be easier than bongs because the absence of combustion in dabbing creates less resin buildup. Dab rigs do, however, build up reclaim, which can clog your rig and hinder the flavor of each dab. They can also be difficult to clean when they have complex filtration features. Repeated use of a nail can cause carbon and reclaim buildup, especially if the nail isn’t cleaned regularly.
Below is a comprehensive, step-by-step guide on how to clean and maintain a dab rig for optimal performance and vapor purity.
What you’ll need
Before you begin the process of cleaning your dab rig, you’ll need to gather the following ingredients and materials:
- 99% isopropyl alcohol (rubbing alcohol)
- Coarse sea salt
- One large sealable plastic bag or container
- Cotton swabs
Cleaning your dab rig step-by-step
Step 1: Torch your nail
One of the simplest ways to clean a nail or banger is to heat it with a torch lighter until reclaim or residual carbon burns completely off. If buildup is minimal, torching a nail should clean it sufficiently. You can also try cleaning the surface of your nail with an alcohol-soaked cotton swab.
One of the simplest ways to clean a nail or banger is to heat it with a torch lighter until reclaim or residual carbon burns completely off. Photo by: Gina Coleman/Weedmaps
Step 2: Remove the nail and put it in a sealable bag with alcohol
If torching your nail isn’t enough to clean off all carbon or reclaim buildup, place the nail in a sealable container or plastic bag and let it soak in alcohol. If you’re using a sealable bag, try adding salt and shaking the bag when necessary.
Place the nail in a sealable container or plastic bag and let it soak in alcohol. Photo by: Gina Coleman/Weedmaps
Step 3: Pour the water out of your rig
Before you begin cleaning your rig, pour the old water out into a sink or drain.
Note: If you use your rig often, change the water out daily. Doing so will help prevent reclaim buildup and preserve the flavor and cleanliness of the vapor.
Step 4: Add alcohol
Fill the base of your rig with 99% isopropyl, or rubbing, alcohol. If a deeper cleaning is needed, first add coarse sea salt until it covers the bottom of the base.
Step 5: Shake your rig
Cover the holes of your rig, either with your hands or standard-size plugs or caps, if necessary, and shake the rig to loosen and dissolve reclaim buildup.
Step 6: Rinse the rig and nail
Once you’ve cleared the reclaim from your rig and nail, rinse them thoroughly with warm water. Lightly shake the rig as you rinse to wash away the remaining reclaim.
Once you’ve cleared the reclaim from your rig and nail, rinse them thoroughly with warm water. Photo by: Gina Coleman/Weedmaps
Similarly to resin, reclaim can be collected and reused to make edibles, tinctures, and capsules. It can also be reused for dabbing, as it often retains some cannabinoids from the original concentrate.
Some dab rigs have “drop-down” attachments, which will trap reclaim and make it easier to collect. If your dab rig doesn’t have a drop-down attachment and you are forced to remove it using alcohol, reusing the reclaim is not recommended.
Remember, a dab rig needs regular maintenance for optimum performance. Change your rig’s water out often, and lightly clean your nail with a cotton swab after each dab. Regularly cleaning your rig means you’ll have to deep-clean it less frequently.How to clean a dab rig Copy article link to clipboard. Link copied to clipboard. Contents What you’ll need Cleaning your dab rig step-by-step Collecting reclaim As
How to Make a Homemade Dab Rig
Increased legalization of cannabis has brought significant growth to the marijuana industry. Many innovations have been introduced into the weed world, but it is important to note that none of these has been able to change the manner through which we consume our cannabis concentrates.
With many names, such as as shatter, budder, crumble, wax, sauce, sugar, and crystalline, all of these different concentrate types turn dispensaries to curators of taste. It’s no surprise to see that the concentrates unit has seen many changes over time, and this has also given many cannabis users a peek into the world of dab rigs.
These dab rigs can be expensive sometimes, so our article will focus on how to make a homemade dab rig.
Vape Pen or Dab Rig
Even though vape pens are becoming popular among users and proving to be one of the best ways to consume our favorite concentrates – due to their discreet size and ease of use – most stoners would still prefer to consume their concentrates using a dab rig. Having a similar design to traditional bongs, dab rigs are typically made with borosilicate glass, and utilize a banger or nail rather than a bowl.
Image Courtesy of vapecritic.com
Readymade or Homemade Dab Rigs?
Well, this will depend on your choice and what you are looking for. For most concentrate enthusiasts, a readymade dab rig might be one item they can’t do away with, but at the same time, it is essential to put the cost of these items at the back of your mind as they may not come that cheap.
Dab rigs come in many forms and designs, and you can get some for as low as $20, and some can even go as high as $1000.
For new entry users and people that might want to minimize cost on this treasured item, the homemade dab rig happens to be an alternative that will serve the almost same purpose with the expensive ones.
How to make a homemade dab rig
Now, what might have brought you here is how to make a homemade dab rig. This will depend on the material you have at your disposal and how creative you can be. In our guide, we will talk about a simple design that anyone can have access to.
To make a homemade dab rig, you will need:
- A titanium nail
- Mason jar with lid
- Aluminum foil
- A pen
The 1st thing you need to do is get your mason jar with a lid. You then drill two holes on the cover, directly across from each other. You then take your aluminum foil and roll it up around the pen, after which you stick it through one of the holes on the lid – this will serve the purpose of the down stem.
You then take the titanium nail and stick it down the foiled down-stem. The part where the nail touches the lid can also be foiled; basically, the point where you should have your glue or silicon.
Now, in the other hole, you stick a bendy straw, which will serve as the water pipe, and wrap some foil around it so it will be airtight. Once you get all these together, the next step is to fill the jar with water alongside your favorite concentrate and then heat up.
Image Courtesy of Shroomery.org
More material needed
Now that you understand how to make a homemade dab rig and put one together, you must add a few items to make it a perfect one. See below to find below a list of items that will put the final touches to your dab rig.
- Torch: You will need a torch to heat the banger or the glass jar. You can’t heat up the banger without the torch, and you can’t dab without your concentrate, so it is an essential tool in your quest to get the best from dabbing. It is preferable to get butane torches compared to propane torches since they are more portable and burn cleaner.
- Butane: To fill up the blowtorch, you will need butane to refill your torch when it becomes empty. It is essential to read the instructions on the bottle before refilling the torch. This is necessary to avoid potential hazards.
- Traveling Case: You will need to move your dab rig from one location to another with you, so you might want to get a carrying case that will allow you store your dab rig while you are on the move.
- Timer: Timing is essential when dabbing, so you need to get a device to help you with the right time. You can use your smartphone or even a stopwatch, or just any other timer device to track the time used in heating the glass jar.
How to use a dab rig
Once you have your dab rig in place, it is not difficult to use. The banger can be heated with a blowtorch for 30 seconds or until it begins to glow red. You then wait for approximately 60 seconds before placing the concentrate in the heated area with a dab tool. This then vaporizes the concentrate and makes it ready for consumption.
The setup of a dab rig, also called an oil rig, allows you to activate terpenes and cannabinoids, giving a potent and highly flavored hit.
Whether you are only dabbling into the massive world of concentrates and purchasing your 1st dab rig, or you are just entering connoisseurship and seeking to boost your rig collection, it is essential to understand what you want when choosing a dab rig or making one at home.Setup of a dab rig, allows you to activate terpenes & cannabinoids, giving a potent & highly flavored hit.Explore different ways of making homemade dab rig. ]]>