Due to the volatility of these solvents, technicians typically use closed-loop extraction systems, which allow them to safely control elements like temperature and pressure in order to achieve the optimal result. Due to the volatility of these solvents, technicians typically use closed-loop extraction systems, which allow them to safely control elements like temperature and pressure in order to achieve the optimal result. Depending on the solvent selected, the resulting extract is put into a vacuum oven to ensure complete solvent removal prior to consumption. Different textures are the result of deliberate steps taken before or after the initial extraction process.
In fact, many other textures, such as budder and crumble, start off as shatter. Shatter is known for its resemblance to brittle glass, which shatters on contact, but can also have a “snap and pull” consistency that gives it elastic-like properties. Shatter should be vaporized using a dab rig, and can be created using a variety of solvent extraction methods, the most popular of which include BHO, PHO, EHO, and CO2. Shatter is known for its resemblance to brittle glass, which shatters on contact, but can also have a “snap and pull” consistency that gives it elastic-like properties. The textures badder and budder are the result of agitating terpene-rich shatter into a more creamy consistency. To achieve this frosting-like texture, technicians whip the shatter under low and even temperatures to introduce and redistribute air molecules. The volume of these air molecules determines the density of the resulting texture. The textures badder and budder are the result of agitating terpene-rich shatter into a more creamy consistency. Crumble is shatter that has been whipped, like badder and budder, and then purged in a vacuum oven at low temperatures to “dry” the concentrate while retaining its cannabinoid and terpene content. Crumble is shatter that has been whipped and then purged in a vacuum oven at low temperatures.
Crystalline is a transparent or semi-transparent cannabis concentrate that may resemble coarse decorative sparkling sugar or kosher salt. Multiple methods can be used to produce crystalline, but they all follow the same basic principles of crystallization. An example of crystallization is making rock candy. Rock candy is a flavored confection that’s produced when sugar (a chemical solid) is slowly added to boiling water (a liquid). The resulting solution cools a bit, then flavor and color is added. Over time, crystals form and grow on the prepared stick, eventually yielding the desired product. Crystallization is a process where a chemical solid is mixed with a liquid to create an initial solution. Any impurities are removed from the initial solution, and the extract is then mixed with another solvent under a different set of conditions to start the formation of pure crystals. Crystalline is a transparent or semi-transparent cannabis concentrate that may resemble coarse decorative sparkling sugar or kosher salt. Distillates are made by exposing a winterized and decarboxylated extract to heat and vacuum, which promotes the separation of cannabinoids based on their different boiling points. Distillates are made by exposing a winterized and decarboxylated extract to heat and vacuum. (Photo by: Gina Coleman/Weedmaps) The information contained in this site is provided for informational purposes only, and should not be construed as medical or legal advice. Dispensaries are responding to this by placing discounts on wax that has sugared up. So what is the truth behind why some wax sugars and why others do not? Is sugaring a sign that a sample has reached a shelf life? Polymorphism or “nucleation” is what happens when lipids and/or contaminants left in a sample of shatter begin to separate from the cannabinoids they homogenized with during the extraction process. The trichomes are just looking to revert back to their natural state. This happens for several reasons and cannot be attributed to a single causation. Strains with higher lipid content in the trichome heads, in other words a more dense waxy cuticle layer surrounding the bulbous head of the trichomes, tend to sugar up more when made to shatter. Also, other strains contain terpenes that are hydrophilic, meaning they attract water. Contamination and or/agitation of the sample (dust, pollen, water, etc…) either during or post processing can also cause nucleation to begin in susceptible strains. As aforementioned, some strains contain hydrophilic terpenes that will increase the chance of water entering into the sample if it has been improperly stored. Winterization, otherwise known as “dewaxing,” is a process used to remove the lipids from the finished product. Often, these lipids can be harsh on the lungs and unpleasant to inhale. This is why some hash users prefer a dewaxed product. This does not guarantee that a sample will not sugar up, but the process will certainly help.
Nucleation can also be triggered by changes in temperature, humidity, or overexposure to oxygen over a period of time. This is why proper storage of shatter is essential. Some people claim that moisture in the starting material sample will cause nucleation to occur.
This is only partially true in that moisture can be a trigger for nucleation just as any contaminant in the product has the potential to be. Some hash connoisseurs prefer dabbing sugars over shatter. Valuable terpenes are often lost during winterization. Not only are these terpenes responsible for the flavor, but they have the ability to modulate cannabinoid synthesis.