How to use Dark Knight HONOUR (3 in 1) Vaporizer
(NOTE: BEFORE YOU READ BELOW! THIS UNIQUE VAPORIZER IS CAPABLE OF CONDENSING RESIN OILS FROM CONSUMED MEDIA WITHIN ITS CHAMBERS. THESE CONDENSED DEPOSITED RESIN OILS ARE THEN AVAILABLE FOR EXTRACTION / USE AS NEEDED. MMJ PATIENTS FIND GREAT VALUE IN THE MEDICAL CONTENT OF THESE CONDENSED RESIN OILS DUE TO THEIR POTENTIAL THC AND CBD HEALING COMPONENTS. THIS IS STILL A UNIQUE AND VALUABLE FEATURE THAT NO OTHER VAPORIZER OF ITS KIND PROVIDES IN TODAY’S MARKET)
STEPS FOR DAILY USE
1 – Proceed to load your grinded Herbs until the vaporizing chamber is full. You do not need to compact your herbs into the chamber; they should be allowed to settle in. To extend the life of your vaporizer and to minimize particulates you should always place a micro filter (included) between your herbs and the bottom of the ceramic cup.
Note: You can load wax or liquid into the vaporizing chamber using the glass vial included with the unit.
2 – Close down the vaporizer with its Glass Dome piece.
3 – Press the ACTIVATION button FIVE times until the Display reads LCD ON. At this time the LCD will show battery status, vaporizer status, current temperature, set temperature and vaporizing time along with a visual thermometer.
4 – Use the ” + or – ” buttons to enter the vaporizing temperature desired.
5 – Leave the ” – ” button pressed 3 seconds to customize the vaporizing time for the unit to remain ON at the specified temperature.
Note: Once the vaporizer reaches the vaporizing temperature desired it will remain at set temperature for the vaporizing time entered. You can always stop your vaporizing time by pressing the ACTIVATION button in the middle of the heating process.
6 – Press the ACTIVATION button again to initiate the vaporizer’s automatic heating process.
Note: Once the vaporizer begins its heating process the vaporizer status indicator shown in the display will change to an HOUR-GLASS indicating that the process is underway.
Note: This vaporizer iluminates during operation!! Once activated the vaporizer will light up RED until it reaches a temperature of 392 F, it will glow GREEN between 392 F and 464 F, and it will reach its BLUE color once the vaporizing temperature exceeds 464 F. The vapor extracted from dry herbs will therefore be englufed in light providing a unique look and experience during use.
7 – Once the temperature reaches the vaporizing temperature desired it will remain at set temperature for the duration of the vaporizing time entered. At this point the vaporizer status indicator will change from an HOUR-GLASS to a PLAY icon.
Note: Depending on how warm the Vaporizer was from its prior use will determine how long it will take to reach the vaporization temperature desired.
8 – Proceed to inhale and enjoy your clean Dry Herb Vapor.
9 – Once the vaporizing time expires you may press the ACTIVATION button once again and the vaporizer will go back to initiating its vaporization procecss (STEP 6).
Note: The vaporizer will operate at the entered time and temperature settings as long as they aren’t altered.
10 – Once all the Dry Herb has been vaporized empty the vaporizing chamber from all the consumed herb.
Note: The BATTERY STATUS indicator will display when the battery is running low and in need of recharging.
Note: Be sure to press the ACTIVATION button FIVE times to turn the vaporizer OFF prior to maintenance or storage.
This vaporizer provides the user with three internal memory settings. In order to program any of these settings the vaporizer must be turned ON:
1 – Press the ACTIVATION button and keep it pressed for 3 seconds.
2 – Once the display changes you’ll see the three internal memory settings that you may program.
3 – Press the ” + or – ” buttons to navigate and select the memory setting you wish to modify.
4 – Once selected press de ACTIVATION button 3 times to edit the selected settings.
5 – Adjust the temperature of the selected setting using the ” + or – ” buttons
6 – Press the ACTIVATION button once again to adjust the vaporizing time of the memory setting selected.
7 – Once you are through editing the memory states you wish press the ACTIVATION button 3 times once more to return the main menu.
Note: Due to the fact that this vaporizer can process dry herbs, liquids and wax the memory settings facilitate usage when changing between different media.
1 – Be sure that the vaporizer is OFF. (The BEST TIME to clean your vaporizer is when the unit is still warm / hot. Exercise caution when dealing with warm / hot parts).
2 – Use a dry cotton towel tip to thoroughly remove excess grime / resin from your ceramic cup / bowl. Remove the ceramic cup by unscrewing it from the vaporizer head. (Be sure to use vape pliers / tools along with contact prevention materials / cloths as needed to avoid damaging or scratching your ceramic cup / bowl).
3 – Clean off any resin / grime (ideally while the unit is still warm) found in the bottom metal contacts of your ceramic cup / bowl. If these contacts are not thoroughly cleaned off resin deposits when dry may prevent proper contact between the cup and the vaporizer head preventing the unit to function properly or from the vaporizer recognizing that a cup has indeed been cleaned / replaced.
4 – Once all excess has been removed wet a cotton swab with alcohol and use it to remove any left-over resin in the vaporizing chamber, its contacts or within the ceramic cup / bowl itself and leave it clean. Do this with as many wet cotton swabs as needed so that all remaining pollutants are removed.
5 – Allow all components to dry at room temperature and wait until all alcohol evaporates.
6 – Once the components are dry reassemble your vaporizer so that it is again ready for use.
7 – Proceed to follow the STEPS FOR DAILY USE as needed
Note: Typically ROUTINE MAINTENANCE is required once every month or as desired per frequency of use.
How to use Dark Knight HONOUR (3 in 1) Vaporizer (NOTE: BEFORE YOU READ BELOW! THIS UNIQUE VAPORIZER IS CAPABLE OF CONDENSING RESIN OILS FROM CONSUMED MEDIA WITHIN ITS CHAMBERS. THESE