Bong Joint Size Guide – How To Measure Your Joint Size & Gender
One of the most important things to know when buying a new bong or bong accessories is the joint size and gender. While all of the bongs and dab rigs on our website come with their own bowl or nail, there may come a time when you want to upgrade your bong or rig and buy a new nail or bowl. This is when it’s important to know the joint size and gender you need to make it fit. We put together a quick bong joint size guide for quick reference and will explain in further detail below. This quick guide will show you how to measure your joint size or bowl size using only a dime!
Male Vs Female Joints
The first and most important thing to know when determining the right piece to buy is the joint gender. Bongs, bowls, nails, ash catchers, adapters, dropdowns, and all other bong parts have a gender, male or female. All you need to know is that male pieces go into female joints and female pieces go on top of male joints. So if your bong has a female joint you will need to buy a male jointed bowl or dab nail and vice versa.
What Gender Is My Bong Joint?
The image below shows you how to identify what gender your bowl or bong joint is. This is very simple if your joint is male it will use the same sized female accessories. If your joint is female, it will use the same sized male accessories.
Before you go buy a new bong bowl or nail you need to know the joint size of your bong or dab rig. Bong joint sizes come in three different sizes, 10mm, 14mm or 18mm. The most common joint size is 14mm, you will rarely see 10mm joints and 18mm joints are usually only find on the biggest sized bongs. If you see anyone mention 14.5mm or 18.8mm joints don’t get confused these are the same as 14mm and 18mm joints.
Most often referred to as micro or nano joints, 10mm joints are usually only found on pendant rigs or the smallest dab rigs designed for extreme portability. A 10mm joint is easy to identify because it is extremely small.
The most common of all joint sizes is 14mm. Almost all small-medium sized bongs and dab rigs have 14mm joints. To find out if your joint is a 14mm all you need is a dime. If the dime is about the same size as your joint its a 14mm. If the dime falls into the joint its an 18mm, and if the joint is much smaller than a dime you have a 10mm joint.
Another common joint size, 18mm joints are usually only found on the largest bongs. This is to increase airflow since the piece is much larger. If a dime falls into your joint then you have an 18mm joint.
How To Measure Your Bong Joint Size Using A Dime
This is the quickest and easiest way to measure your bong joint size. For almost all bongs and dab rigs you only need to worry about two sizes: 14mm and 18mm. The image below shows you what your joint or bowl will look like compared to a dime. As you can see below the dime falls into the 18mm joint and sits on top of the 14mm joint. Using a dime is the easiest way to measure your bong joint and determine what size your bong joint is.
The image above also helps you determine the bowl size using a dime. A 14mm male bowl piece is about 3/4 of the size of a dime whereas an 18mm male bowl piece is almost the entire size of a dime.
To summarize: whatever gender joint you have, it will use the opposite gender and same sizes for its parts, bowls and accessories. If you make a mistake when buying a bong part you can always buy an adapter to make it work. Adapters are small glass pieces that can change the joint size and gender of your bong or dab rigs. Although, we know after you finish reading this bong joint size guide you will never make that mistake!This quick guide will show you how to measure your bong joint using only a dime! Knowing the correct bong joint size and gender is crucial when buying new bong accessories, bowls, or dab nails.
How To Measure Glass Joint Size for your Bong Using a Penny
Measure the glass joint size has always been a daunting task until now. With all the different angles, sizes, and genders it can get a little confusing. We have put together the simplest and easiest way to determine what size joint your bong is using just a penny. You don’t have to worry about finding a ruler just follow the next few steps and you will know instantly what size joint you have.
Hopefully this picture was helpful for you in determining your joint size. Main things you need to know:
- The male joint slides into the female joint.
- Most people have either 14mm or 18mm.
- 10mm is pretty rare, its smaller than half of the penny.
Good luck, and please share this post if you found it helpful.
Here’s How to Measure Bong Joint Size:
This is probably the simplest way to measure the bong joint size. For most bongs and dab rigs you only have to worry about two sizes: 14mm and 18mm. Here is a pic of how those look side by side.
As you can see in the picture above, the penny goes down about halfway on the 18mm female joint. The penny test is the easiest way to measure the glass joint, and determine what size your bong joint is. Got a penny lying around? Go ahead and try it out.
Here are the 14mm and 18mm Male Bowls that Will Fit Inside
The 14mm male joint goes a little bit past the half way mark on the penny. For bangers this is the most popular joint size.
A less common size is the 10mm, usually used on very small dab rigs. Here’s how the 10mm male looks next to a penny.
What Gender is My Bong Joint
This one is pretty simple, the male end slides into the female.
If your joint is female, it will use the same size male accessories.
If your joint is male, it will use the same size female accessories.
Pictured above is the 14mm Female Joint with 14mm Male Quartz Banger
Pictured above is the 14mm Male Joint with a 14mm Female Banger
In conclusion, whichever gender joint you have, it will use the opposite gender and same size for its parts.
Good luck and we hope this guide really helped you get a good idea of joint sizes and how to measure them easily.Check out our simple guide for how to measure the glass joint size of your bong using just a penny! These photos will help you quickly determine what size joint you have and what size bowl or banger you need to use. ]]>