Categories
BLOG

automatic roll

Automatic roll

AMONG ZPM PRESSES ACCESSORIES

One of the features that make ZPM PRESSES so innovative is the possibility to install on the rotor group unit (composed by die & press rolls) an automatic distance adjusting system for the rollers – as an optional:

– Through a system of self-control a continuous, micrometric adjustment is produced as well as the consequent optimization of the distance of each roller to the extrusion die. Of course, all of this may occur also while the machine is in motion and without any need for the operator’s intervention.

A sensor system provides in real time the possibility to monitor on a PLC display all parameters and performances of the automatic adjustment and allow possible changes of its settings.

The self-adjustment system ensures the optimal usage of all components, in particular with regards to the working life of all consumable parts of the extruder group. It also supports a proper, long lasting and homogeneous consuming of those parts, with tangible economic savings in the maintenance of the machines and in the replacement of consumables.

One of the accessories most requested by professionals in the industry of pellets!

AMONG ZPM PRESSES ACCESSORIES One of the features that make ZPM PRESSES so innovative is the possibility to install on the rotor group unit (composed…

Automatic roll forming machines

Sheet thickness: 0.3 mm – 0.8 mm
Sheet width: 30 mm – 150 mm

. DALLAN T4 roll forming machine Carriage with systems for fly cutting and perforation for cable holes Unloading table Taking into account the production speed that is reached, the line .

. reaching a forming speed of no less than 60 metres a minute with traditional type dies. The line comprises: Decoiler Electronic feeder DALLAN HSP high speed press DALLAN T4 roll forming .

. manufactured on the same machine by simply increasing the distance between the toolheads with which the edges of the coil are formed to make the connecting edges. The forming is then completed with automatic .

MULTIPLE AUTOMATIC PROFILING MACHINE WITH 4 HEADS Automatic machine with 4 motorspindles to work with 4 different grinding wheels contemporary reducing the working .

AUTOMATIC MACHINE FOR STEPS AND EDGING MGP/3 is the new automatic machine for steps and edging on ceramic, gres porcelain, marble, granite and agglomerate materials. .

. /5 is the new automatic machine for steps and edging on ceramic, gres porcelain, marble, granite and agglomerate materials. It is a revolutionary model that allows two different types of machining .

Sheet thickness: 4 mm – 5 mm

. Guardrail, there are four lines totally:① two wave guardrail roll forming machine, ② U post roll forming machine,③ connection punching .

. Russian type Guardrail, there are four lines totally:① two wave guardrail roll forming machine, ② U post roll forming machine,③ connection .

Sheet thickness: 1.5 mm – 2 mm

. able to manufacture more machines like upright section roll forming machine and shelf panel roll forming machine etc. Description: This .

Sheet thickness: 0 mm – 1.5 mm

Rollforming line for automatic production of shelving montant starting from coil. The machine is composed by these units: enter roller conveyor, introduction unit, rollforming unit, cutting-off unit, .

Sheet thickness: 0 mm – 1.5 mm

Machine for automatic rollforming, punching and cutting of reinforcements for metal structures. The reinforcement and the metal structure are assembled by clinching operation. The machine .

Sheet thickness: 0.5 mm
Sheet width: 914 mm

Metal Roof or Wall Roll Forming Machine is a roof/wall panel roll forming machine for continuous rolling and cold-forming .

Automatic roll forming machines Sheet thickness : 0.3 mm – 0.8 mm Sheet width : 30 mm – 150 mm . DALLAN T4 roll forming machine Carriage with systems for fly cutting and perforation ]]>