Categories
BLOG

3d bongs

3d bongs

Thsi is a bong :v

Bong For ”Tobaco” only use ¯\_(ツ)_/¯

A Bong for this Head: https://amzn.to/2MklkRU

Bong Print Settings Printer Brand: RepRap Printer: WANHAO Duplicator i3 Notes: Печатать без поддержек

. with aluminium foil. 🙂 I’ve also included a KEY CHAIN bong – print it at 50% size! You can also print the normal bong at 50% – makes a cool pen / wacom stylus holder 🙂 Print settings: 0.2mm layer height 2 or 3 shells 30% infill Have fun! .

Print at 7 wall just for safety measures for water leaks

Shrek. . But a bong.

Its a bong that is cut in 3 parts to make it mobile and small.

Its a basic pet bottle bong. Its fits for Sprite and other 1 lt pets. . Have enjoy!

gopro support bong cam d50 Print Settings Printer: sharebot kiwi Supports: No Resolution: 0.3 Infill: 10%

“Enjoy Building the Bong of your Dreams with Maker Bong” Smaller print Maker Bong is meant for tobacco and medicinal marijuana use only. Warning smoking is dangerous to your health** ** I do not know what types of plastics your makerbot’s or.

A modular bong that uses an m36 thread to connect all the components. . The downstem is 12mm in diameter and it includes a carb hole.

. bong. . you will need a 16-19mm ground glass shaft and a bowl piece. print in whatever material you want, the print doesn’t get hot as it uses glass parts. print base, print tube, either print seals or use elastics, put bong together and enjoy.

. a bong that is designed to look like a bolt and print without supports. . The downstem tube has an 18mm diameter as it is designed to fit an 18mm grommet. The inhalation tube contains an ice-pinch to hold ice and cool the smoke an it leaves the bong.

Octopus Bong ——————- This is a design that is intended to bring an old glass piece back to life. We’ve all had a bong or two that has broken on us and it is a devastating experience. With this product we could simply slide our glass shaft.

this is a bust i already found on my mini factory https://www.myminifactory.com/object/3d-print-deadpool-bust-65076 great artist and i went in and hollowed it out and made a bong out of it.

Bootie Bongs™ are a new product line by Bootie Empire LLC, the firm behind the Bootie Babe® brand (bootiebabe.com). Included in this design set: • A complete model with logos included in the feet • A complete model with no logos in the feet •.

The extension is not necessary but is recommended to give it the classic bong appearance, prevent splashing from a big hit, and provide space for more ice to be held by the ice-pinch. The bong was designed to print in a 200mm x 200mm x 180mm build.

I uploaded two designs: 1)Basic: just the hexagonal Bong. 2)Leaf: the Bong with simplified weed leaf. Thought it looks good. And also made a design with a more realistic leaf but I think it’s difficult to print well (I’ll upload under request) .

Bootie Bongs™ are a new product line by Bootie Empire LLC, the firm behind the Bootie Babe® brand (bootiebabe.com).Included in this design set:• A complete model with logos included in the feet• A complete model with no logos in the feet• Individual.

This is a series of different parts ,that you can build a customized bong for yourself. HD comes from Hugo Design. the tube for the bowl piece is approximately 18 mm ,recommend to use your own glass bowl but if you want to you can print one but.

. I Imported one part of this bong into the MakerBot Desktop software and a pop-up menu said that the object seemed to be designed for inches, would I like to scale it up to millimeters. I clicked affirmative and the part appeared the correct size.

This bong has a activated carbon filter (you can find this where aquarium components are sold) section just below the mouthpiece section, which makes the rips oh so smooth. Below the activated carbon section is the ice chamber. Below that is the.

This bong has a activated carbon filter (you can find this where aquarium components are sold) section just below the mouthpiece section, which makes the rips oh so smooth. Below the activated carbon section is the ice chamber. Below that is the.

made this so you can have a super head rush if you dont know how to use a bong look it up print at LEAST 60% infill print at MAX 0.1 layer hight make sure supports only touch the build plate if leaks spray with clear flex seal and let it dry. . when.

This is a bong that is specifically designed to be used with the Juul. Simply fill with water right above the percolator and insert your Juul. I printed mine at 100% infill and 0.25mm layer height but i’m sure you can tweak those to your liking. .

bong ✅. Bong Print Settings Printer Brand: RepRap Printer: WANHAO Duplicator i3 Notes: Печатать без поддержек ]]>